How do we join knitwear pieces together on a linking machine?

1. You need to know how much Guage the knit fabric is. There are 12GG, 14GG, 7GG, 9GG, and 3GG….. flat knitting Fabrics.
2. It is necessary to know what type of plate sewing machine is used. Different needle types of flat machines correspond to different needle types of plate sewing machines. As normal 12GG flat knitted fabric need a 16GG sewing machine
3. Each part of the sweater is separate, consider what part of the first clothes.
4. Know the corresponding parts of each piece to pay attention to the front and back of the piece.
5. Linking yarn that should match the color of the body, and then check the linking yarn if fastness enough.
6. Be careful for the seam can not be too wide, and generally, keep 1-2 stitches.
7. Pay attention to a lot of collar or lapel interfaces that need a joint loop to loop, or there will be a loophole

8. See the overlap of the two knitted pieces. They can not be pulled and loosened at the same time, which will cause uneven clothes.
9. Some accessories, such as the collar, need to remove waste and yarn when stitching, otherwise, the collar or hem edge will be heavy. Too much fabric inside the tubular.
10. Pay attention to the marks on the cloth in the process of linking. it is a key step in joining two-piece together
11. before the link, need to adjust the machine speed and the density of the sewing yarn, which should be judged according to the thickness of the fabric and yarn composition.

12. After linking, remove the excess waste yarn. Be careful not to disassemble and pull randomly, which will pull out the suture.
13. After the completion of the sewing, each thread at the interface should be cleaned, not cut off directly with scissors, which is different from the process of clothing.
14. the lightbox inspection is the last step of the linking, need to take the lampshade to check whether there is a needle leak.